The ReefTank Exclusive system aquarium 770 liter room divider white glass ,
Simply different than the others
The ReefTank Exclusive System Aquarium Room Divider White Glass offers a good and solid basis for the successful and easy operation of a beautiful seawater biotope. This attractive system not only differs from many conventional aquariums due to its rimless design, but also impresses with its very high-quality, powder-coated base frame, which sets standards in terms of stability, functionality and longevity. The steel frame is clad into an elegant and timeless piece of furniture using waterproof plastic panels (Vekaplan S integral foam panel) into which magnets have been embedded for fastening. To improve ventilation of the inside of the cabinet, the front side where the drain is located remains without a panel. A shaft cover that covers the backpack overflow can be ordered for an additional charge (item no.: RT-1062 in white; RT-1063 in black).
The weak points of other system aquariums, such as mismatched technology, rusting hinges, swollen wood and loud running noises, were taken into account when planning this system aquarium in order to rule out these errors right from the start and to be able to provide the customer with a system , which simply works.
The aquarium is made of white glass. In contrast to normal float glass, white glass is almost colorless and has a high level of light transmission. This makes it appear very transparent. All glass components are made from white glass -Made in Germany-. This guarantees stress-free glass panes of the highest quality, which are very resistant to scratching. The view of the aquarium remains unobstructed for years to come. To conceal the backpack filter, the rear panel is painted black.
The ReefTank base frame consists of a 40 mm steel frame, which has been primed and powder-coated twice. All base frames of the ReefTank system aquariums have a load distribution plate made of 19 mm screen print, which is attached to the underside of the steel frame. This means your floor is optimally protected from selective load damage. Another screen printing plate on the floor of the cabinet interior serves as a clean support surface for the filter system. It lies inside on the frame of the steel frame. A screen printing plate is also attached to the top of the steel frame. This means that the aquarium stands on a flat, water-repellent surface. Thanks to this design, an absolutely firm stand is guaranteed, which prevents stress damage to the glass. The material is 100% seawater resistant.
For optimal functionality, the load-distributing plate has a projection of 9 mm beyond the frame. In this way, the door panels always have a flush contact surface. This means that the annoying look of hanging doors is a thing of the past.
Each ReefTank Exclusive System Aquarium Room Divider White Glass has a backpack overflow that is 10 cm deep and 30 cm high. The length depends on the depth of the aquarium. An overflow comb is deliberately avoided because it becomes clogged over time and causes the water level to fluctuate. For this reason, the overflow of this system aquarium is implemented via an 8 mm wide drainage gap, 4 cm below the top edge of the tank. In this way, optimal surface suction is ensured and scum skin is effectively prevented. Fish and other organisms are also protected from getting into the shaft. Cleaning is kept to a minimum. A clear and clean look is guaranteed at all times.
The system has a drain and an emergency drain (55 mm hole each for 40 mm PVC fittings). These lead to the dream box. This enables safe operation and effectively protects you from inventory damage caused by water overflowing from the aquarium. The inlet is via a hole in the front of the aquarium (34 mm hole for 25 mm PVC fittings), where the backpack drain is located. In this way, heavily pressurized holes in the base plate are avoided. This ensures additional security.
The Exclusive systems are delivered with a Dreambox (filter) that is adapted to the size of the aquarium. The water draining from the aquarium is first sent through the Dreambox's fleece bed filter. The pre-cleaned water flows into a chamber in which there is a skimmer, which is also adapted to the size of the aquarium. This chamber also houses a media filter that you can equip with different filter materials. The Dreambox also includes a built-in refill storage tank for your osmosis water. All built-in pumps (return pump, skimmer pump, bypass filter pump) are continuously adjustable and run very quietly. The filter is made of PVC and has a clear front. The Dreambox is also covered with transparent PVC panels and can be illuminated using small, hidden LEDs and controlled using the included remote control.
The system is delivered including PVC piping. You can install these according to your own ideas.
You can also have the system piped by AquaPerfekt. Please ask for your price.
Special magnetic clip-on holders have been developed to ensure clear organization in the base cabinet. These can be attached to the base frame without any drilling (item no.: RT-1030). We also provide these with the required sockets (item no.: RT-1029 + RT-1031), which can be added to the system.
Pool aquarium made of white glass 160 x 80 x 60 cm, plus 10 cm backpack filter on one end
12 mm bottom disc and 15 mm side discs
Covered substructure 162.00 x 84.00 x 92.00 cm (overall dimensions)
White powder-coated color
Filter system Royal Dreambox 120 x 49 x 61 cm for Reeftank 770 liters.
2 pieces AquaPerfekt Reeflight LED 150 cm
